전체상품목록 바로가기

본문 바로가기

이전상품 다음 제품 보기

포커스라이트 ISA One - Analogue (해외배송 가능상품)

기본 정보
상품명 포커스라이트 ISA One - Analogue
원산지 중국 China
소비자가 1,034,000원
판매가 940,000원
배송방법 택배
배송비 3,000원 (50,000원 이상 구매 시 무료)
수량 수량증가수량감소
SNS 상품홍보
SNS 상품홍보

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
포커스라이트 ISA One - Analogue 수량증가 수량감소 940000 (  )
총 상품금액(수량) : 0 (0개)
바로구매하기 장바구니 담기 SOLD OUT 관심상품등록




Specifications
  We always quote 'real world' performance figures (measured to the AES17 standard). Some companies choose to quote chipset performance, which is misleading, and here's why.

Mic Input Response
  Gain range = 0dB to 60dB in 10dB steps + 20 dB of variable gain
  Input Impedance, variable as follows:
  (Switched Impedance setting Equivalent Input Impedance at 1kHz)
  Low = 600 Ohms
  ISA110 = 1400 Ohms
  Med = 2400 Ohms
  High = 6800 Ohms
  EIN (equivalent input noise) = -126dB measured at 60dB of gain with 150 Ohm terminating impedance and 22Hz/22kHz      band-pass filter
  Noise at main output with gain at unity (0dB) = -97dBu measured with a 22Hz/22kHz band-pass filter
  Signal to noise ratio relative to max headroom (9dBu) = 106dB
  THD at medium gain (30dB) = 0.0009% measured with a 1kHz -20dBu input signal and with a 22Hz/22kHz band-pass filter
  Frequency response at minimum gain (0dB) = -0.5dB down at 10Hz and -3dB down at 125kHz
  Frequency response at maximum gain (60dB) = -3dB down at 16Hz and -3dB down 118kHz
  CMRR=98dB (Channel 1, 1kHz, maximum gain with +24 dBu input)
  Crosstalk Channel to Channel: with 10dB@1kHz input to chA, chB output =104dBrA. With 10dB@10kHz input to chA, chB output = 84dBrA

Line Input Response
  Gain range = -20dB to +10dB in 10dB steps + 20 dB of variable gain
  Input Impedance = 10k? from 10Hz to 200kHz
  Noise at main output with gain at unity (0dB) = -96dBu measured with a 22Hz/22kHz band-pass filter
  Signal to noise ratio relative to max headroom (24dBu)=120dB
  Signal to noise ratio relative to 0dBFS (+22dBu) = 118dB
  THD at unity gain (0dB) = 0.001% measured with a 0dBu input signal and with a 22Hz/22kHz band-pass filter
  Frequency Response at unity gain (0dB) = -0.3dB down at 10Hz and -3dB down at 200kHz

Instrument Input Response
  Gain range = 10dB to 40dB continuously variable
  Input Impedance:
  High = greater than1M
  Low =greater than 300k
  Noise at minimum gain (+10dB) = -92dBu measured with a 22Hz/22kHz band-pass filter
  Noise at maximum gain (+40dB) = -62dBu measured with a 22Hz/22kHz band-pass filter
  THD at minimum gain (+10dB) = 0.001% measured with a 10dBu input signal and with a 22Hz/22kHz band-pass filter
  Frequency Response at 10dB gain with -10dB input = 10Hz-100kHz +/- 0.6dB
  Frequency Response at 40dB gain with -40dB input = -2.5dB down at 10Hz and 0dB at 100kHz

High Pass Filter
  Roll off = 18dB per octave 3 pole filter
  Fixed Frequency 75Hz measured at the 3dB down point

Meters
  Moving coil (MC) meter is factory calibrated to 0VU = +4dBu with 1kHz sinewave. With the VU Cal button pressed the meter  can be adjusted on the rear panel to allow 0VU to equal +10dBu to +26dBu with the centre detent being equal to +22dBu.
  Peak LED meters calibrated in the detent position for 0dBFS = +22dBu, calibration is adjustable on the rear panel to allow  0dBFS to equal +10dBu to +26dBu
  Routing for MC and Peak1 meter is after the HPF, pre insert send or switched post insert return. Peak2 is always pre ADC  channel 2, which can be fed by external input or Instrument input.
  LED levels are as follows when peak calibration is set to center detent on the rear panel. (This is when using the internal  ADC).
  0 = +22dBu
  -2 = +20dBu
  -6 = +16dBu
  -12 = +10dBu
  -18 = +4dBu
  -42 = -20dBu

FRONT AND REAR CONNECTIVITY

Analogue Channel Inputs:
  Mic input: XLR x 1
  Line input: XLR x 1 and TRS x1
  Instrument input TRS Jack: XLR x 1
  External ADC input: TRS Jack x 1
  Return: TRS Jack x 1

Analogue Channel Outputs:
  Send: TRS Jack x 1
  Balanced line output: XLR x 1
  DI output: XLR x 1
  DI through: TS Jack x 1

Analogue Channel Additional I/O:
  Cue mix left input: TRS Jack x 1
  Cue mix right input: TRS Jack x 1
  Headphones output: ¼” TRS Jack x 1

Weight
  3.9kg
  8.6Ibs

Dimensions
  220mm (W) x 104mm (H) x 254 - 290mm (D - top to bottom)
  8.66' (W) x 4.1' (H) x 10' - 11.4' (D - top to bottom)
  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 3,000원
  • 배송 기간 : 1일 ~ 3일
  • 배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
    고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.

  • 교환 및 반품이 가능한 경우
    - 상품을 공급 받으신 날로부터 7일이내 단, 가전제품의
      경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
    - 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
      다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내

    교환 및 반품이 불가능한 경우
    - 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
      포장 등을 훼손한 경우는 제외
    - 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
      (예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
      따른 반품/교환은 제조사 기준에 따릅니다.)
    - 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
      제공한 경우에 한 합니다.
    - 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
    - 복제가 가능한 상품등의 포장을 훼손한 경우
      (자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)

    ※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
      (색상 교환, 사이즈 교환 등 포함)

즐겨찾기

최근본상품

이전 제품

다음 제품

위로가기